What is the purpose of the rule that requires certain lighters to be child-resistant?
This rule reduces injuries and deaths that occur when children under the age of 5 light fires while playing with cigarette lighters. The rule covers disposable and novelty cigarette lighters and requires generally that:
- at least 85% of the children who test a surrogate (dummy) lighter in the manner described below must not be able to make it work;
- the mechanism or system that makes the lighter child-resistant must reset automatically each time someone tries to light the lighter;
- the child-resistant mechanism must not impair the safe operation of the lighter when the lighter is used in a normal and convenient manner;
- the child-resistant mechanism must work properly for the reasonably expected life of the lighter; and
- users must not be able to easily override or undo the child-resistant mechanism.
Lighters that do not meet these requirements are in violation of the Consumer Product Safety Act. 15 U.S.C. 2057 and 2068(a)(1).
Where can I find the requirements for lighters?
The standard is published in the Code of Federal Regulations in Title 16, Part 1210.
What is a lighter?
A lighter is a flame-producing product that consumers commonly use to light cigarettes, cigars, and pipes, although it may be used to light other materials. The term “lighter” does not include matches or any other lighting device intended primarily to light materials other than smoking materials. When used in this summary, the term “lighter” includes only the disposable and novelty lighters defined below.
What is a disposable lighter?
A disposable lighter is a lighter that either:
- cannot be refilled with fuel or
- uses a gas such as butane, isobutane, propane, or other liquefied hydrocarbon under pressure, and has a Customs Value or price from the manufacturing factory under $2.25. (This value is adjusted every 5 years, if necessary, according to percentage changes in the monthly wholesale price index from June 1993.)
What is a novelty lighter?
In general, novelty lighters have features that make them attractive to children under five.
Novelty lighters include lighters that depict or resemble articles commonly recognized as appealing to or intended for use by children under 5 years of age, such as cartoon characters, toys, guns, watches, musical instruments, vehicles, toy animals, food or beverages. They also include lighters with features entertaining to children, such as visual effects like flashing lights or sound effects like musical notes. A novelty lighter may operate on any fuel, including butane or liquid fuel. Novelty lighters are subject to the requirements for child-resistance regardless of their Customs Value or factory price.
What is a surrogate lighter?
A surrogate lighter is a substitute for an actual working lighter. Surrogate lighters are used for testing so that the children tested do not have to try to operate real lighters. A surrogate lighter approximates the appearance, size, weight, and shape of an actual lighter intended for use by consumers. It does not have fuel, and must also be identical to the actual lighter in all characteristics that might affect child resistance, including the method of operation and the force(s) needed to operate the lighter. When operated, a surrogate produces a sound or visual signal to let the tester know that it has been operated in a manner that would have caused the actual lighter to light.
How do you test a cigarette lighter to make sure it is child resistant?
If you need to test a lighter, we recommend that you find a qualified lighter-testing laboratory in the U.S. to perform the test. A list of testing facilities known to the staff is available from the Office of Compliance or on the Commission's Web Site at: https://cpsc-stg.ctacdev.com. Also, you should review the test protocol carefully to make sure that you comply with all of the testing requirements.
The qualification test uses at least one, but no more than two, test panels of 100 children between the ages of 42 and 51 months to test surrogate lighters. Each panel is divided into 3 groups – 30 children 42 through 44 months old, 40 children 45 through 48 months old, and 30 children 49 through 51 months old. Approximately ⅔ of the children in each group must be boys. The test procedure allows a small variation in the size of each group and in the number of boys and girls in each group. Each child in the test panel must live within the United States, and have no illness, injury, or disability that would interfere with the child’s ability to operate the test lighters. No child may participate in more than one test panel or test more than one model of a cigarette lighter. Before any child participates in a test, a parent or legal guardian must agree in writing to let the child participate.
Two children at a time participate in the test in a welllighted room that is familiar to them and is free from distractions. A tester first operates a surrogate lighter in the presence of the children without letting them see what he or she is doing, so that they will know what sound or visual signal the surrogate makes when it is operated successfully. The tester then gives each child a surrogate lighter, and asks the children to try to make the same sound or signal. Each child has five minutes to try to do this.
If a child succeeds in making the sound or signal, he or she is not tested further and that child’s test is counted as a failure of the lighter that the surrogate represents. The tester shows any child who does not succeed in the first five minutes how to make the surrogate make the sound or signal. The child then has five more minutes to try to operate the surrogate successfully. Any child who succeeds in operating it in the second five minutes is also counted as a lighter failure.
For a lighter to pass, at least 85% of the children tested must be unable to operate the surrogate lighter. For the first 100-child test panel, if 10 or fewer children operate the surrogate successfully, the lighter that the surrogate represents passes. If 19 or more children succeed, the lighter fails. In either case, no further testing is necessary. If 11 through 18 children in the first panel operate the surrogate lighter successfully, the second 100- child panel is tested. In that case, the lighter fails if 31 or more of the total 200 children tested operate the surrogate successfully.
Are there other requirements?
Yes. After conducting qualification tests on surrogate lighters, manufacturers and importers must certify that the lighters they sell comply with the standard. Certification assures that the child-resistant mechanisms on lighters produced for sale perform as effectively as the mechanisms on the tested surrogates. A certificate must be based on a reasonable testing program of lighters sampled during production or on a test of each lighter produced for sale. Every manufacturer and importer of lighters subject to the standard must also label each lighter, must keep records of child testing in English on paper, microfiche, or similar media, and must give those records within 48 hours to any designated officer or employee of the Commission who asks for them within 48 hours. Please refer to the standard for the specific requirements for labeling and record keeping.
In addition, at least 30 days before any manufacturer or importer imports into or distributes in the United States any model of lighter subject to the standard, the manufacturer or importer must provide a written report to the Office of Compliance that includes:
- The name, address and principal place of business of the manufacturer or importer,
- A detailed description of the lighter model to be imported or distributed and of the child-resistant feature(s) used on that model,
- A description of the testing done to establish that the lighter is child resistant, including a description of the surrogate lighter tested, the specifications for the surrogate lighter, a summary of the results of all such tests, the dates the tests were performed, the location(s) of such tests, and the identity of the organization that conducted the tests,
- An identification of the place or places that the lighters were or will be manufactured,
- The location(s) where the records of testing of the lighter are kept, and
- A prototype or production sample of the lighter model for which the report is submitted.
Are there any standards for other hazards presented by lighters?
The Standard Consumer Safety Specification for Lighters, ASTM F400-97, addresses such issues as flame generation, flame control, flame-height adjustment, spitting or sputtering and flaring, flame extinguishing, and structural integrity. The ASTM standard also provides that each lighter be accompanied by instructions or warnings, or both, explaining the proper way to use the lighter.
Where can I find additional information?
For more information on the requirements for lighters, contact the U.S. Consumer Product Safety Commission:
- Office of Compliance (for specific enforcement inquires): e-mail: firstname.lastname@example.org; telephone: (800) 638-2772
- Small Business Ombudsman (for general assistance understanding and complying with CPSC regulations): e-mail: Please use our Contact Form, which is the best way to get a fast response; telephone: (888) 531-9070.
For copies of the Standard Consumer Safety Specification for Lighters (ASTM F 400) contact the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, telephone: (610)-832-9500, Fax (610)-832-9555, or visit http://www.astm.org.
This communication has been prepared for general informational purposes only. This summary document does not, and is not intended to, constitute legal advice nor does it replace or supersede a manufacturer’s obligations to comply with all applicable laws, regulations, standards, or bans enforced by CPSC. This communication has not been reviewed or approved by the Commission, and does not necessarily represent their views. Any views expressed in this communication may be changed or superseded by the Commission.